Screwdriving systems – a guide Archives - WEBER Schraubautomaten GmbH

Contact person

Service-Hotline

en

Products
Main Menu

Handheld screwdriver
WEBER's handheld screwdrivers combine ergonomics and variability in every model. Highly flexible, powerful and suitable for complex screwdriving processes thanks to programmable control technology.

Handheld screwdriver
Handheld screwdriver

Handheld screwdriver HET
The HET handheld screwdriver is a powerful screwdriving system with electric drive. In conjunction with the C30S screwdriving control unit and the bit box, the compact handheld screwdriver is an unbeatable combination for flexible assembly workstations.

Handheld screwdriver HSE
For complex hand-held screwdriving tasks with automatic feed. Horizontal and vertical screwdriving possible.

Handheld screwdriver HSP
The hand-held pneumatic screwdriver with feed is characterized by its low weight and high screw-in speed.

Electric handheld screwdrivers ESB
The ESB electric handheld screwdriver is praticulary suitable for small screws and simple industrial screwdriving tasks.

Fixtured screwdriving systems
Stationary screwdriving technology is used when fastening processes become more complex, cycle times shorter and quality requirements higher.

Fixtured screwdriving systems
Fixtured screwdriving systems

Fixtured screwdrivers SER / SEB
Thanks to their automatic screw feed, the SEB and SER stationary screwdrivers have short cycle times for fully automatic screw fastening. The modular design makes the feed screwdrivers very versatile.

Fixtured screwdriver SEV
Vacuum screwdriver with automatic feed for screwdriving with interfering edges up to 150 mm. Suitable for technical cleanliness in screwdriving processes.

Fixtured screwdrivers SEV-C
The SEV-C enables collaborative cooperation between humans and robots (HRC) and can be used on lightweight robots.

Fixtured screwdriver SER-L / SEV-L
Our feed screwdriver for lightweight robots is particularly suitable for coexisting HRC applications and processing of shank-heavy screws.

Fixtured screwdriver SEV-P
Pick & place screwdriver with automatic tool change for use with lightweight robots - applications include battery assembly and disassembly.

Fixtured screwdriver SEV-E
Suitable for screw connections with interfering contours from 150 mm. The vacuum screwdriver with slide has an automatic screw feeder.

Fixtured screwdriver SEM / SEK
Thanks to our vacuum technology, this stationary screwdriver can assemble DIN-compliant nuts and top-heavy screws. The SEM/SEK can therefore feed fasteners reliably.

Inserting and press-fitting technology
WEBER offers innovative stationary or hand-guided systems for setting technology. These have automatic feeds or intelligent controls and enable high process forces during setting or press-fitting.

Inserting and press-fitting technology
Inserting and press-fitting technology

Fixtured insertion system PEB
Our stationary insertion system can reliably insert fasteners such as pins, bolts or clips with a force of up to 10 kN.

Handheld system HPP
The hand-guided HPP setting unit only requires low pressure forces to press in the fasteners. This ensures fatigue-free working.

Feeding systems
The automation of assembly processes includes the trouble-free feeding and separation of fasteners with as little material damage as possible.

Feeding systems
Feeding systems

Step feeder ZEL
The ZEL feeding unit is the basis for technical cleanliness when feeding and separating screws, nuts or pins. The step feeder offers cycle rates of up to 0.8 seconds.

Bowl feeder ZEB
The ZEB sorting bowl is suitable for conveying and separating very small screws and parts. The automatic feeder is also a robust system for difficult environments.

Refill hopper BB
The storage of screws, nuts or pins in a belt hopper increases the autonomy of the feeding process.

Profile Feed Tubes
Fasteners such as screws, pins, bolts or nuts are fed automatically via a feed hose. So-called profile hoses are used for nuts and top-heavy screws.

Control technology
A process controller - also known as a screwdriving controller - controls the drive of the screwdriving system. It can actively intervene in the screwdriving process using sensors (e.g. torque sensor or depth sensor) to ensure reliable screwdriving. The screwdriving and feeding systems are controlled by a sequence controller.

Control technology
Control technology

Process controller C5S
The C5S process controller is ideal for simple screwdriving tasks. Parameterizable programs can be selected and executed via a customer interface.

Process controller C30S
The C30S process controller was developed to solve complex screwdriving tasks. It also offers detailed evaluations and numerous interfaces that ensure seamless integration into existing production environments.

Process controller C50S
The C50S process controller is used for complex and individually parameterizable screwdriving processes. An individual process sequence can be configured using the latest methods.

Sequence controller C10 / C15
The C10S is particularly suitable for pneumatic manual screwdriving systems, while the C15S is ideal for simple screwdriving systems.

Sequence controller CU30
Our PLC sequence controller has a flexibly programmable PLC with integrated pneumatics. Simple operation is ensured by programming modules and a touch display.

Torque gauge M30

System solutions

System solutions
System solutions

Robot-assisted flow-drilling screwdriving system RSF

Robot-assisted flow-drilling screwdriving system RSF
Robot-assisted flow-drilling screwdriving system RSF

System for function testing the RSF screwdriving, feed or control systems

Setting system for sandwich structures TSS

Inserting system for blind rivet nuts and bolts SBM
Applications
Main Menu

Electromobility
With voltages in the high-voltage range, new challenges arise in the bolting of battery packs. On this page you will find WEBER's innovative solution.

Electrical industry
The electrical industry relies heavily on bolted connections. The aim here is to achieve compact, high-performance results with the greatest possible technical cleanliness.

Mechanical engineering
Manual and stationary screwdrivers from WEBER are used for full or partial automation. Discover solutions for automation in mechanical engineering under the premises of durability, flexibility, process reliability and efficiency.

Aviation industry
In the aviation industry, screwdriving technology impresses with optimized, precise and adaptable screwdriving processes. Find solutions and applications in the aviation sector here.

Automotive and body construction
Flow-hole fasteners or setting processes for blind rivet nuts are the focus of assembly processes in the automotive and bodywork sector. On this page you will find the industrial challenges and solutions for automotive production.

Telecommunications
The highly dynamic telecommunications sector constantly demands new standards. Areas such as miniaturization create major challenges. Here you will find solutions for such tasks, always with a view to technical cleanliness.

Wood industry
Modular design and robust components are decisive factors for the wood industry. Here you will find solutions for fastening to the living raw material wood.

Home appliances
Strict regulations in terms of hygiene and health protection place stringent requirements on screw fittings in the household appliances sector. Discover solutions developed over many years for these areas.

Medical technology
Maximum cleanliness and even sterility of devices are required in medical technology. Here you will discover WEBER solutions that not only meet the high standards in this area, but also set new benchmarks.
WEBER-Technology
Main Menu

Screwdriving systems – a guide
The areas of application as well as the basics of screwdriving technology and other modern screwdriving methods are part of this guide. Among other things, it deals with the gradient method for screw connections.

Blind rivets – a guide
This guide explains what is meant by setting blind rivet nuts and the advantages of this technology.

Industry 4.0 – a guide
Here you can find out what impact Industry 4.0 is having on fastening and feeding technology and what changes and opportunities are arising as a result.

Automated feeding – a guide
What does automatic feeding technology mean and how are elements separated and fed? What needs to be taken into account during feeding in terms of technical cleanliness? Find out here.

Swivel arm
WEBER's swivel arm technology marks the beginning of the automation of screwdriving and joining processes and is therefore part of the WEBER principle. This includes process-reliable screwdriving including fully automatic feeding.

Screwdriving Technology for Robotic Applications

Technical cleanliness – a guide
Cleanliness in complex assembly processes is a decisive factor for the quality and reliability of your products. You can find out everything you need to know about technical cleanliness in screwdriving and feeding processes in this guide.
Company
Main Menu

WEBER Group
As a globally active company, WEBER has manufacturing and sales companies around the world. Find out more about the WEBER Group here.

Taking responsibility
Quality and reliability are essential in the various areas of industrial mass production. Find out more about the values for which WEBER has stood for 60 years.

Our certificates
The quality of our products and services is underlined by the numerous certificates of WEBER Schraubautomaten GmbH.

Purchasing
WEBER quality can only be guaranteed with equally high quality from our suppliers. Find out here about the standards and requirements that WEBER places on its suppliers.

Press
Find out here about news and other interesting topics from WEBER.

Working at WEBER
WEBER is constantly growing and is always looking for committed graduates, career starters and experienced employees who want to contribute to the long-term success of the “WEBER Schraubautomaten” brand.

Apprenticeship
Service
Main Menu

Services
The WEBER service team takes care of you and your machines from the very first customer meeting. Find out here about the comprehensive services, training and more offered by WEBER.

Services
Services

Customer service
WEBER understands “customer service” as a complete, comprehensive and competent program for process optimization. You can make an inquiry about WEBER customer service here.

Repair order
WEBER's repair team ensures that downtimes are minimized. Find out more about our fast and reliable service here, or submit a repair request.

Spare parts
Even in times of fragile international supply chains, WEBER is at your side quickly and reliably with the right spare parts. Make a spare parts inquiry here.

Competence Center – Training
WEBER offers training and instruction for employees. Find out more here, or submit a training request.

Complaint & Warranty
WEBER relies on early consultation with its customers to prevent any problems. Here you can find out more about complaints and quality management, or submit a complaint request.

Downloads
Here you will find software for our products, important SAP, service and sales documents. You can also download WEBER Schraubautomaten GmbH certificates here.

Terms and Conditions
Here you will find a brief description of our terms and conditions of business and service. All documents can be found under Downloads.

Contact

Service-Hotline

en

Homepage | Screwdriving systems – a guide

Company Contact

Address Headquarter
WEBER Schraubautomaten GmbH
Hans-Urmiller-Ring 56
82515 Wolfratshausen

T. +49 8171 406-0
E. info@weber-online.com

Service hotline

Monday to Friday
From 6.00 a.m. to 10.00 p.m.
P. +49 8171 406-444
E. service@weber-online.com

Service & After Sales

Services
Customer service
Repair order
Spare parts
Competence Center – Training
Complaint & Warranty

Products

Handheld screwdriver
Fixtured screwdriving systems
Inserting and press-fitting technology
Control technology
Feeding systems
System solutions

© WEBER Schraubautomaten GmbH

Legal Notice
Cookie-Settings
Privacy policy
AGB

Find your local Sales Representative

For general requests

P. +49 8171 406 0
E. info@weber-online.com

Service Hotline

Monday – Friday:
From 6.00 a.m. to 10.00 p.m.

P. +49 8171 406 444
E. service@weber-online.com

Service request

Services
Customer service
Repair order
Spare parts
Competence Center – Training
Complaint & Warranty

Select your desired language

Čeština
Deutsch
English
English (US)
Español
Français
Italiano
Magyar
Polski
简体中文

Number finder

The way to your number.

Look for a 7-digit number on your WEBER product.

For controls:

For stationary helicopters:

For feeders: